1. Industry
Send to a Friend via Email

Your suggestion is on its way!

An email with a link to:

http://construction.about.com/od/Bidding-Process/a/Estimating-Structural-Steel.htm

was emailed to:

Thanks for sharing About.com with others!

You can opt-out at any time. Please refer to our privacy policy for contact information.

Discuss in my forum

Estimating Structural Steel

Tips when estimating structural steel

By

Estimating Structural Steel
Image Source/Getty Images

Estimating Structural Steel

Structural steel prices can vary widely from one day to another. Having a good estimate done is crucial to be the low bidder on the job. We will present you with some tips and example on how to get the best estimate for the structural steel.

When estimating structural steel, you must consider the location of where the material is purchased and the quantity that is been purchased. Warehouse prices will apply to small orders and mill prices will apply to large orders. Remember, that prices offer by supplier or manufacturer are as of time of delivery. Maybe you must think to incorporate escalation clauses into the contract to deal with unexpected cost rising on the material. The framing system of a building continues to typically account for 10% to 12% of the building cost.

Estimating Procedure

Structural steel normally is priced by weight, so you must understand what sections you are going to use and the meaning of the lettering of structural sections. For example, the standard method for specifying the dimensions of an American Wide Flange Beam is, for example, W 6 x 25, which are 6 inches deep with a weight of 25 lb/ft.

  • Prepare your take off by grouping steel by their grade.
  • Group your material per section or member type.
  • Continue grouping by method of tied connection.
  • Group structural steel by their location on the project.
  • Maintain sequence of take off by columns and details.
  • Specify the beams and details per floor.
  • Take off quantities for bracing and flooring under a separate area.
  • Remember to estimate the quantities of plates, connectors and accessories.
For example, consider having the material listed on the table in your design.

Complete the table with the information of type of section, quantity used, length of pieces, total length required of each particular section and the weight per linear feet. When finished, the addition of the last column will give you an estimate of how much pounds of steel are needed in your project.

Computing Structural Steel Weight

Properties
Material Section Number Length(ft) Total Length Wt/Ft Total Wt(Pounds)
W 14 X 132 1 20 20 132 2640
W 14 X 120 1 30 30 120 3600
W 16 X 40 5 20 100 40 4000
W 27 X 94 1 30 30 94 2820
W 18 X 50 2 30 60 50 3000
W 14 X 43 1 20 20 43 860
W 18 X 84 3 15 45 84 3780
W 14 X 109 8 15 120 109 13080
W 24 X 68 1 34 34 68 2312
W 16 X 26 1 25 25 26 650
  1. About.com
  2. Industry
  3. Construction
  4. New Construction
  5. Industrial Projects
  6. Tips When Estimating Structural Steel

©2014 About.com. All rights reserved.